NXI NetLinx Integrated Controller
1
NetLinx Integrated Controller (No Master) - Operation Reference Guide
NXI NetLinx Integrated Controller
Overview
The NXI NetLinx Integrated Controller represents the new generation of AMX multi-port central controllers. The NXI
can be programmed to control RS-232/422/485, Relay, IR/Serial, and Input/Output devices using the NetLinx
programming language and NetLinx Studio program. Depending on your specific control needs, the NXI can be
equipped with either a Master or Hub Card. For use as a master controller, the NXI accepts the NXC-ME260 NetLinx
Master Card.
Front Panel
The NXI is equipped with a removable faceplate that covers the front panel components (FIG. 1):
Remove the faceplate to see the front panel containing groups of colored LED indicators that light when their
corresponding control ports receive/ transmit data (FIG. 2):
These LEDs are grouped by control type, and are numbered according to their corresponding port (connector) numbers
on the rear panel.
Rear Panel
The rear panel contains all of the port connectors, plus the ID pushbutton and ICSP LED (FIG. 3):
FIG. 1
NXI front panel with faceplate installed
FIG. 2
NXI front panel with faceplate removed
FIG. 3
NXI rear panel
I/O LEDs
IR/Serial LEDs
Relay LEDs
RS-232/422/485 TX/RX LEDs
Master/Hub Card Slot
Master/Hub Card Slot
ICSP LED
ID Pushbutton
Relays (port 7)
I/O (port 16)
IR/Serial (ports 8-15)
RS-232/422/485 (ports 1-6)