52
Audio/Video Configuration
Master Controller Configuration Options
The NCITE-813AC Presentation System features a NetLinx central controller functionally equivalent to an NX-2200. The NCITE-
813AC provides the same set of configuration pages that are available to the NX-series controllers.
NOTE:
& Programming Guide (available at www.amx.com).
WebConsole - System Configuration
The NCITE-813AC (and all other NetLinx Masters) features a built-in WebConsole that allows you to make various configuration
settings via a web browser on any PC that has access to the Master.
The webconsole consists of a series of web pages that are collectively called the “Master Configuration Manager” (FIG. 59).
The webconsole is divided into six primary sections, indicated by six control buttons across the top of the main page (FIG. 60):
FIG. 60
System Configuration Menu Options
Home
: This option appears when you access the System Configuration page. Use these options to view any connected
device or access a module. This option only appears on the NCITE-813AC.
Network
: Click to access the Network Settings for the Master. The options on these pages enable you to view and modify
the IPv4 and IPv6 network settings and the clock settings for the system.
Security
: Click to access the System Security page. The options in this page allow you to configure various aspects of
NetLinx System and Security on the Master, including network configuration and creating users and roles.
System
: Click to access the System Details page. The options on this page allow you to view and configure various as-
pects of the NetLinx System. This option only appears on the NCITE-813AC.
Modules
: Click to access several different device-related pages. This option only appears on the NCITE-813AC.
Switcher
: Click to access the Switcher Configuration page.
WebConsole User Interface - Additional Documentation
available at www.amx.com.
Using a Web Browser
You can access the configuration settings for the Presentation System by using the latest, industry-accepted version of HTML5
web browsers. If a browser is inconsistent, upgrade or try a different browser. The system configuration pages are available by
entering the IP address of the NetLinx master into the location bar of your web browser. Entering your IP address into your web
browser opens the Main WebControl page (FIG. 61).
FIG. 61
Main WebControl page
Perform these steps to access the configuration settings:
1. Open a web browser.
2. Enter the IP address of the presentation system in the location bar of the web browser. (If you do not know your device’s IP
address, see the
Locating the IP Address of the Presentation System
section on page 53.) The Main WebControl page opens
(FIG. 61).
NOTE:
WebControl requires that you install the latest version of the Adobe Flash Player plug-in for your browser. If your browser
does not have the Flash Player plug-in installed, you will be prompted to install it.
3. Click the Switcher tab to open the Switcher Configuration page.
If a web browser or Flash Player is not available, the buttons on the front panel and NetLinx commands provide equivalent
controls for audio/video configuration. See the
section on page 45 for more information.
Instruction Manual - Incite Digital Video Presentation Systems
