46
Audio/Video Configuration
Audio Settings
Press the MENU ON/OFF button on the front panel of the presentation system to access the on-screen menu and the Audio
settings. The Audio settings appear as default when you access the on-screen menu. The following table lists the audio options
available for inputs on the on-screen menu:
The following table lists the audio options available for inputs on the on-screen menu:
Instruction Manual - Incite Digital Video Presentation Systems
Audio Settings - Inputs Menu Options
INPUTS/OUTPUTS 1-8
Input Name
Displays the name of the audio input. This option is view-only.
Stereo
Use the left and right navigational buttons to select a group of preset equalizer settings. You can choose from Enable or
Disable.
Input Gain
Use the left and right navigational buttons to adjust the gain/attention level of the audio input. You can set the gain from
-24 to +24dB in 1dB increments. The default setting is 0.
Analog Audio
Use the left and right navigational buttons to change the audio format of the selected audio input. You can choose from
Enable or Disable.
Test Tone Enable
Use the left and right navigational buttons to enable or disable the test tone set for the selected audio output. This option is only available
for audio outputs.
Test Tone Generator
Use the left and right navigational buttons to select a test tone for the selected audio output. You can choose from Off,
60Hz, 250Hz, 400Hz, 1kHz, 3kHz, 5kHz, 10kHz, Pink Noise, and White Noise. This option is only available for audio outputs.
MICROPHONE
Mic Mode
Use this option to switch between Single Stereo and Dual Mono microphone modes. Select Single Stereo to adjust both microphone inputs
or Dual Mono Mode to adjust the microphone settings individually. See the Changing the
Microphone Mode section on page 47 for information on how to the change the microphone mode.
Single Stereo
Use the left and right navigational buttons to set the mix level of microphone 1 in the overall mix. You can set the mix level from 0 to -100.
The default setting is 0.
Enable
Use the left and right navigational buttons to toggle whether the selected microphone is active. You can choose from Off or On. The default
setting is Off.
Phantom Power
Use the left and right navigational buttons to turn on or turn off phantom power for the selected microphone. You can set the Phantom
Power to On or Off. The default setting is Off.
Preamp Gain
Use the left and right navigational buttons to adjust the preamp gain level of the microphone input. You can set the gain from 0 to +65dB in
1dB increments. The default setting is 0.
Dual Mono
Use the left and right navigational buttons to adjust the maximum volume of the audio output. You can set the maximum volume from 0 to
100 in increments of 1. The default value is 100.
Enable
Use the left and right navigational buttons to toggle whether the selected microphone is active. You can choose from Off or On. The default
setting is Off.
Phantom Power
Use the left and right navigational buttons to turn on or turn off phantom power for the selected microphone. You can set the Phantom
Power to On or Off. The default setting is Off.
Preamp Gain
Use the left and right navigational buttons to adjust the preamp gain level of the microphone input. You can set the gain from 0 to +65dB in
1dB increments. The default setting is 0.
Audio Settings - Outputs Menu Options
OUTPUTS 1-8
Output Name
Displays the name of the audio output. This option is view-only.
Volume
Use the left and right navigational buttons to adjust the volume level of the audio output. You can set the level from 0 to
-100.
Mute
Use the left and right navigational buttons to enable or disable volume muting on the audio output.
Test Tone Enable
Use the left and right navigational buttons to enable or disable the test tone set for the selected audio output.
Test Tone Generator
Use the left and right navigational buttons to select a test tone for the selected audio output. You can choose from Off,
60Hz, 250Hz, 400Hz, 1kHz, 3kHz, 5kHz, 10kHz, Pink Noise, and White Noise.
Audio Group
Displays the audio group this to which the audio output belongs.
Amp
The options below appear when you press the right navigation button while this option is highlighted.
Volume
Use the left and right navigational buttons to adjust the volume level of the amplifier. You can set the level from 0 to
-100.
Mute
Use the left and right navigational buttons to enable or disable volume muting on the amplifier.
Test Tone Enable
Use the left and right navigational buttons to enable or disable the test tone set for the selected audio output.