background image

14

Overview 

Overview 

AMX Incite Digital Video Presentation Systems are the next generation of presentation switchers that combine AMX  control and 

signal distribution with HARMAN audio. Video presentation features include advanced windowing with  scaling allowing for various 

video configurations (side-by-side, top-bottom, and picture-in-picture), and live production  style video features such as transition 

effects. Support and scaling for 4K/60 4:4:4 and HDCP 2.2, as well as lower  resolutions, ensures the Incite family provides flexi-

bility for visiting devices and compatibility from source to display whether  using legacy or new devices. Audio features include DSP 

with advanced capabilities like independent 10-band  parametric EQ, independent input gain adjustments, and variable compres-

sion, Advanced Feedback Suppression™ and  two of the three models also include DriveCore amplification technology. 

FIG. 1 displays the NCITE-813AC.  

FIG. 1  

NCITE-813AC 

The Incite Digital Video Presentation Systems covered in this manual include the following devices:  

4K/60 4:4:4 Support 

Incite supports today’s 4K content without modifying the color space or reducing the frame rate. 

HDMI 2.0 and HDCP 2.2 Support 

By incorporating HDMI 2.0 and HDCP 2.2, the NCITE products are compatible with all the latest 4K sources and displays. 

Scaled Outputs 

Provides current and future support for permanent and visiting source devices connected at the same time, both 4K and  non 4K. 

Current HD signals can be up-scaled, while 4K60 can be downscaled, providing flexible compatibility from source  to display. 

Advanced Windowing with Scaling 

Send two sources to a single display in various preset configurations (side-by-side, top-bottom, and picture-in-picture)  regard-

less of source resolution, Incite will scale the sources to fit the resolution requirements of the destination display. The  Incite also 

includes “Live Production” Style Video Features such as transition effects when switching between sources  providing presenters 

with a professional look and feel. 

DSP by BSS 

Includes an integrated digital signal processor with advanced capabilities like independent 10-band parametric EQ,  independent 

input gain adjustments and variable compression, allow precision tuning to match unique source and room  attributes. Enhanced 

Microphone Processing includes 3-band EQ, compressional, gating, auto-ducking, and limiting on  each microphone input to en-

sure crystal clear communication. 

dbx AFS (Advanced Feedback Suppression) 

Never experience feedback problems again, Advanced Feedback Suppression (AFS) takes the guesswork out of  controlling feed-

back, which is not only annoying but can even damage speakers – and ears. AFS is flexible and easy to  use: just choose the level 

of suppression you want, and you’re done. AFS automatically stops feedback in its tracks.  

Instruction Manual - Incite Digital Video Presentation Systems  

Incite Digital Video Presentation Systems

Name

FG#

Description

Page Ref

NCITE-813

FG1901-10

8x1:3 4K60 4:4:4 Digital Video Presentation Switcher with HDCP 2.2, Video 

Scaling, Distance Transport, Advanced Windowing, DSP, Advanced Feedback 

Suppression

page 16

NCITE-813A

FG1901-12

8x1:3 4K60 4:4:4 Digital Video Presentation Switcher with HDCP 2.2, Video 

Scaling, Distance Transport, Advanced Windowing, DSP, Advanced Feedback 
Suppression, DriveCore Amplification

page 16

NCITE-813AC

FG1901-16

8x1:3 4K60 4:4:4 Digital Video Presentation Switcher with HDCP 2.2, Video 

Scaling, Distance Transport, Advanced Windowing, DSP, Advanced Feedback 
Suppression, DriveCore Amplification, NX Central Control

page 19

Summary of Contents for NCITE-813













































































































































Reviews: