AMX MAX-MDLD, Operation/Reference Manual

Page: 19 / 32

Using MAX MDL200 and the MAX-MDLD
13 MAX-MDL200 Multi-Disc Loader System
Verifying Disc Information
In some cases in which the program has indicated more than one possible match for a disc, it may not be
obvious which of the possible matches represents the best match for the disc. In these cases you should
eject the disc momentarily so that you can visually check the physical label on the disc. The
Eject and
Load buttons on the Multiple Matches dialog allow you do this quickly:
1.
Double-click on the disc/slot in question (in the Disc/Slot Window) to access the Multiple Matches
dialog (FIG. 4). Review the list of possible title matches in this dialog.
2.
Click on the Eject button in the Multiple Matches dialog. This option ejects the disc from the
MAX-MDLD. Remember that you have approximately 10 seconds to remove the disc from the slot.
3. Look at the disc label to discern which of the possible title matches best matches this disc.
4.
Press the Load button in the Multiple Matches dialog, and replace the disc in the Disc Loading Slot.
5.
Select the best possible match in the Multiple Matches dialog and click OK .
FIG. 5 Finding the UPC Code on a DVD or CD case
Example back cover of
In this example the UPC code is "097360962925".
a typical DVD case
UPC codes are unique 12-digit catalog
They can usually be found on the back cover
Make sure you include any smaller numerals that
appear to the left or right of the main barcode numerals.
numbers that identify a particular item.
of the DVD or CD case.
Note that by using the Eject and Load buttons in the Multiple Matches dialog, the
program retains any disc information that exists for this disc.
This is also true for the Load and Eject buttons in the New Title Entry dialog (see
FIG. 6).
By contrast, if you eject a disc from the MAX-MDLD via the Eject options in the
Changer menu, or the Disc Context Menu, all disc information is lost. These options
are intended to be used at the point that the disc is being permanently removed from
the MAX-MDLD, once the loading process is complete.
If you eject the disc via the Multiple Matches or New Title Entry dialogs, be sure to
reload the same disc. If you eject a disc and then load a different one, the disc
identification information will be incorrect.
Do not close the Multiple Matches (or New Title Entry dialog) until the disc has been
reloaded. If the dialog is closed while the disc is still ejected, the slot will be set to
<empty>, and all disc information will be lost.