Introduction
1
i!-Schedule
Introduction
i!-Schedule is an application that allows you to schedule NetLinx events directly from a touch panel
connected to a NetLinx control system. i!-Schedule provides a user interface to schedule up to 240
NetLinx events to run on a repeating or non-repeating basis. i!-Schedule also provides a scheduling
engine that triggers each event at the appropriate time and reschedule repeating events.
Two scheduling modules are available with i!-Schedule.
i!-ScheduleEngineMod
is the scheduling engine module only. This module has no user
interface and can be used for fixed events that do not need to be edited by the user. Use
this module if you do not want a user interface for scheduling.
i!-ScheduleMod
includes the functionality of the engine module and provides a user
interface where the user can edit the scheduling of events. Use this module if you want a
user interface for scheduling. You do not need to include the i!-ScheduleEngineMod if
you use this module.
Supported Operating Systems
Windows 95
®
/98
®
(with at least 48 MB of installed memory)
Windows NT 4.0
®
Workstation or Server (service pack 6 B or greater, with at least
64 MB of installed memory)
Windows 2000
®
Professional or Server (running on a Pentium 266 MHZ processor
(minimum requirement); 300 MHZ or faster recommended, with 96 MB of installed
memory.)
Windows ME
®
(running on a Pentium 266 MHZ processor (minimum requirement);
300 MHZ or faster recommended, with 96 MB of installed memory.)
Windows XP
®
(running on a Pentium 266 MHZ processor (minimum requirement);
300 MHZ or faster recommended, with 128 MB of installed memory.)
Minimum PC Requirements
Windows-compatible mouse (or other pointing device)
At least 5 MB of free disk space (150 MB recommended)
SVGA monitor, with a minimum screen resolution of 800 x 600
A Network adapter
