Overview and General Specifications
17
Instruction Manual – HDMI-UTPRO-0808
HDMI-UTPRO-0808 Product Specifications
* The fuse is internal and is not field serviceable. If you believe the fuse needs to be replaced, contact technical support
(see page 43).
HDMI-UTPRO-0808 Specifications
Parameter
Value
Approvals
UL, cUL, CE, FCC Class A, RoHS, WEEE
Humidity
0 to 90% non-condensing
Operational Temperature
32° F to 113° F (0° C to 45° C)
Storage Temperature
-22° F to 158° F (-30° C to 70° C)
AC Power*
100 VAC to 240 VAC, single phase (50 Hz to 60 Hz)
Power Consumption (max.)
110 Watts, fully loaded
Thermal Dissipation (max.)
375 BTU/hr, fully loaded
MTBF
71,000 hours
Dimensions
Depth
Width with mounting ears
Width without mounting ears
Height
Approximately 12 in. (30.5 cm)
18.9 in. (48.0 cm)
17.4 in. (44.2 cm)
3.5 in. (8.9 cm) (2 RU)
Weight
Approximately 13 lb. (5.9 kg)
Shipping Weight
46 lbs (20.87 kg) for complete system kit including 8 RXs (2 shipping boxes)
Front Panel Components
Function Key
The Function Key accesses the Function menu on the LCD.
Control Dial
The Control Dial scrolls through menu options and adjusts values, such as global preset
numbers.
Select Key
The Select Key enters a menu selection and can be used to execute presets.
LCD Display
The LCD displays the Function menu. The Function menu and its submenus access the
different modes and lists used to control the system.
Cancel Key
The Cancel Key clears an incomplete operation and returns the display to the beginning
of a submenu or list.
Take Key
The Take Key instructs the system to execute or disconnect a switch.
Input/Output 1-8 Keys
Input and Output Keys (1-8) correspond to the input and output connections on the rear
of the enclosure. These keys are used to select the input and outputs for routing source
signals to destination devices as well as for status and other operations such as locking
and unlocking the control panel.
Power LED
The Power LED illuminates to indicate the unit is receiving power.
Rear Panel Components
Power Connector
The universal power receptacle accepts all major international standard power sources.
Note:
The rating along the sides of the power connector contains important installation
information.
Control Port (CPU)
Bi-directional RS-232
Baud rates of 9600, 19200, 38400, 57600 (default 9600)
DB-9 connector
Status LED (CPU)
System status indicator
ID Push Button
Places the system in NetLinx Device ID assignment mode (requires NetLinx Studio).
Not required for installation.
LAN 10/100 port (Ethernet)
Native NetLinx Device
TCP/IP (LAN 10/100)
Serves built-in WebConsole
Auto MDI/MDI-X cross-over
RJ-45 connector
