AMX Epica DGX 144, Instruction Manual

Page: 74 / 107

Appendix B – Managing Configuration Files
70 Epica DGX 144 Instruction Manual
AMX AutoPatch CD Information
If you cannot locate the AMX AutoPatch CD that shipped with your system and your AMX account has
the required permissions, you can download the newest version of XNConnect from www.amx.com .
An INI file Updater for updating XNConnect is available on the AMX website under Tech Center \
AutoPatch Tools; an account is not required. If you need an .xcl configuration file that is compatible with
your system, either discover the system (see page 72) or contact technical support (see page 43) and
provide your system’s serial number.
Installing XNConnect
Use this software only if you need to customize or change the configuration information from the
original specification.
Note: Even if XNConnect is already on your PC, install the newest version that shipped on the same
CD as the configuration file. We strongly recommend uninstalling the old version of XNConnect
before installing a newer version.
System Requirements
Windows
®
XP Professional
233 MHz processor
Minimum of 128 MB of RAM
20 MB of available hard drive space
800x600 screen resolution (1024x768 is recommended)
Serial port and RS-232 null modem cable
To install XNConnect from the AMX AutoPatch CD:
1. Close all other applications currently running on your PC.
2.
Insert the AMX AutoPatch CD into your CD drive to start automatically.
If the CD does not autorun, explore the CD folder and double-click the Index.html file.
3.
Select Software and find XNConnect.
4. Optional – Select Release Notes to read about the software before installation.
5.
Select Install.
6.
Follow the directions in the subsequent dialog boxes.