AMX DVX-21XXHD Webconsole & Programming Manual Download

Page: 45 / 116

WebConsole - System Options

NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide

Resetting the Master Controller to the Factory Defaults Configuration

Click the

Reset To Factory Defaults

button. This resets the Master to its’ factory default state. This includes:



Removal of all security settings



Removal of all user files



Resetting to DHCP



Loading an empty NetLinx program.

Once reset, the Master will be effectively in an out-of-box state.

NOTE:

It may be necessary to refresh the browser window after the master has finished booting (click Refresh).

Manage System - Control/Emulate Options

Click the

Control/Emulate

link (in the

Manage System

tab) to access the Control/Emulate Options page (FIG. 48). The options on

this page allow you to

Control

Emulate

a device connected to this Master.

Device Control/Emulation is accomplished by manipulating a target device’s channels, levels, and sending both send commands

and strings to the device.



Control

a device means that the program generates messages which appear to a specified device to have come from the

Master.



Emulate

a device means that the program generates messages which appear to the Master to have come from a specified

device (physical or virtual). When

Emulate

is selected, a

Push

button is added to the Channel Code section (see FIG. 48).

NOTE:

The System Number, Device Number, and Port Number fields are read-only. Instead of specifying these values for a System

Device, select a device via the Device Tree to populate these fields with that device’s information.

Controlling or Emulating a System Device

Select the device that you want to Control or Emulate, via the Device Tree:

Click the

Show Device Tree

option to show the Device Tree window (if it is not already enabled).

In the Device Tree, click on the

Information

(

) icon for the device that you want to control or emulate. This opens a

Network Settings page showing network configuration details for the selected device. See the

Device Network Settings

Pages

section on page 33 for details.

Click on the

Control/Emulate

link. This opens a Control/Emulate Options page for the selected device (FIG. 49).

FIG. 48

Manage System (Control/Emulate)

Push

button only displayed if

Emulate

is selected

Summary of Contents for DVX-21XXHD





















































































































Search results

Summary of Contents for DVX-21XXHD

Reviews:

Related manuals for DVX-21XXHD

Brands by name

Popular brands

AMX DVX-21XXHD, Webconsole & Programming Manual

Search results

Summary of Contents for DVX-21XXHD

Reviews:

Related manuals for DVX-21XXHD

Brands by name

Popular brands