![background image](http://html1.mh-extra.com/html/amx/distribution-matrix-precis-sd/distribution-matrix-precis-sd_instruction-manual_2938440061.webp)
Appendix B – Programmer’s Interface for System Diagnostics
56
Precis SD Instruction Manual
Verbosity Settings
The verbosity (
v
) settings (
v0
,
v1
,
v2
,
v3
) correspond to the level of detail that will be displayed,
with
v0
being the lowest level of detail and
v3
being the highest level.
Component Settings
Detailed information for a single system component can be specified by using its identity (
i
) number
setting (
i0
through
i5
) in the following table.
Default Settings
At system boot, the ~
scrv0i1!
setting is displayed (see FIG. 16 on page 28).
If the verbosity setting is omitted, the verbosity level will be the lowest (
v0
).
The component setting must be included; otherwise, entering any of the verbosity settings
alone will result in a display equivalent to
v0i0
.
If both settings are omitted during a query (
~scr!
), the information displayed will be at the
lowest verbosity level for all components (
v0i0
) (FIG. 25 on page 55).
Using BCS to Access System Diagnostic Information
Instructions are provided for accessing the lowest level of verbosity for all components and for accessing
a specific level of verbosity for a specific component.
To access the lowest level of verbosity for all components:
1.
Enter
~scr!
or
~scrv0i0!
Note: Either of these commands provides a “menu” of the identity numbers and their corresponding
components (FIG. 25 on page 55).
Only one verbosity setting and one component setting can be entered in a command. The order in which
these two settings are entered is interchangeable.
To access a specific level of verbosity for a specific component:
1.
Enter
~scr
(to access the splash screen).
2.
Enter the verbosity level setting
v#
and the component (index) setting
i#
.
Either may be specified first.
3.
Enter
!
(to send the command).
Example
~scrv3i5!
or
~scri5v3!
(displays the highest level of detail for the VM Configuration)
Component
ID Number
All Components
i0
Enclosure
i1
Storage Blocks
i2
Communication Interfaces
i3
Hardware & Boards
i4
VM Configuration
i5