background image

© 2016 Harman. All rights reserved. Modero, AMX, AV FOR AN IT WORLD, HARMAN, and their respective logos are registered trademarks of 

HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/

 93-2

1

92-01 REV: A

Last Revised: 

3

/

30

/2016

RGB with Stereo MyTurn-Ready Flat Cable

The RGB with Stereo MyTurn-Ready Flat Cable (

CBL-RGB+A-FL2

) is 16 ft with a flat

design that can be hidden under the carpet. A separate (included) male-male audio

patch cable introduces audio signals from a Source 3.5mm Audio Out jack to be carried

to the Display end through the same RGB cable. The Display end pigtail plugs into the

Display Audio Input 3.5mm jack.  

Use the separate 3.5mm 

Stereo Audio Patch Cable

 (included) to connect to the audio

output on the Source Device. 

USB 3.0 MyTurn-Ready Flat Cable 

USB 3.0 MyTurn-Ready Flat Cable (

CBL-USB-FL2-16

) adds the new transfer mode

SuperSpeed (SS) that can transfer data at up to 5 Gbit/s (625 MB/s), which is about ten

times faster than the USB 2.0 standard. It also supports 900 mA of charging current to

power USB devices. The cable is also backwards compatibility with USB 1.0/2.0

devices.  

Additional Documentation

Refer to the 

Products > Architectural Connectivity 

catalog page on 

www.amx.com

(

Dealer Site

) for additional product documentation.

CBL-RGB+A-FL2-16 CABLE SPECIFICATIONS

FG#:

• FG10-2195-16 - MyTurn Ready Flat Cable

Cable Length

• 16.4 ft (5m)

Connectors:

SOURCE: 15-pin HD VGA (male), with two 3.5mm female ports:

• One port connects to the source device via the separate 

(included) 

Stereo Audio Patch Cable.

• One port is 

inactive

 - use this port to store the 

Stereo Audio 

Patch Cable 

when not in use. See FIG. 6 for details.

• MyTurn ready Over-Mold

DISPLAY: 15-pin HD VGA (male), with a 3.5mm Stereo pigtail 

(male) - connects to the display device:

• The pigtail is 12” (30.5cm) long.

• Molded Strain Relief with lock-down screws

Included:

• 3.5mm Stereo Audio Patch Cable (18” / 45.7cm)

FIG. 6  

RGB + AUDIO FLAT CABLE

3.5mm stereo audio 

pigtail (12”) connects 

to the 

display

 device 

audio input

This end connects

to Source VGA “Out”

This end connects 

to display VGA “In”

Storage Port - use when 

storing the Stereo Audio

Patch Cable when not in 

Audio Port - active audio 

port connects to 

source

 

device audio out via included 

3.5mm Stereo Audio Patch Cable

use.

CBL-USB-FL2-16 CABLE SPECIFICATIONS

FG#:

• FG10-2197-16

Cable Length

• 16.4 ft (5m)

Connectors:

• USB Type A on both ends

• Molded  Strain  Relief

• MyTurn ready Over-Mold

Data Rate:

• 5 Gbps

Charge Current:

• 900 mA

Plating:

• 24K Gold

FIG. 7  

USB 3.0 FLAT CABLE

USB Type A Display End

USB Type A Source End with MyTurn-Ready Over-mold

Reviews: