QUICK START GUIDE
CBL-x-FL2-16
Flat Cables
Overview
Flat cables benefits include weight reduction, space efficiency, flexibility and strength.
AMX flat cables feature MyTurn Ready Over-mold connector ends. With the addition of a
MyTurn™ Source Selection Button (FG554-21) that clips into the specially designed
groove built into the connector housing, participants can switch their content to the
display at the press of a button without moving from their seat.
The MyTurn Source Selection Button communicates with a MyTurn Source Selector
Receiver (FG554-23) which connects to a Solecis digital switcher, AMX master
controller (with I/O), or DVX all-in-one presentation switcher. Any MyTurn-Ready cable
may be equipped with the MyTurn solution.
HDMI 4K60 MyTurn-Ready Flat Cable
The HDMI
directional
cables (
CBL-HDMI-FL2-xx)
are available in 16 and 32 ft lengths
.
The end labeled
Display
connects to the display device (example: HDTV monitor) and
has a built-in lock-down screw. The source end of the cable is not labeled
(FIG. 1)
: .
HDMI Directional Cable Notes
• Avoid using an extension cable on either end of the HDMI cables without using
AMX Powered HDMI 2.0 Cable Extender (FG558-21).
• Connecting the cable backwards, with the connector labeled "DISPLAY" into the
video source, will not damage the equipment. However when incorrectly installed,
the cable will not transmit a signal.
Cat6 Ethernet Flat Cable
The MyTurn-Ready Cat6 Ethernet cable (
CBL-ETH-FL2-16
) with integrated strain relief
(not MyTurn Ready) is 16 ft with a flat cable design
.
Cat6 features more stringent
specifications for crosstalk and system noise, plus performance of up to 250 MHz
(suitable for 10/100/1000Base-T/TX and 10GBase-T).
DisplayPort 4K60 MyTurn-Ready Flat Cable
The DisplayPort to DisplayPort (DP-DP)
cable (
CBL-DP-FL2-16
) is
directional
and includes
an additional DP-HDMI adapter
.
The connector labeled
Display
must be connected to the
display device (example: HDTV monitor). The source end of the cable is not labeled
(FIG. 3)
: .
Mini DisplayPort 4K60 MyTurn-Ready Flat Cable
The Mini DisplayPort to DisplayPort
(mDP-DP) cable (
CBL-MDP-FL2-16
) is
directional
and
includes an additional DP-HDMI adapter
.
The DP connector labeled
Display
must be
connected to the display device (example: HDTV monitor). The mDP source end of the
cable is not labeled
(FIG. 4)
:
DP Directional Cable Notes
• Connecting the cable backwards, with the connector labeled "DISPLAY" into the
video source, will not damage the equipment. However when incorrectly installed,
the cable will not transmit a signal.
HDMI Adapter
The DP-DP and mDP-DP cables come with an additional DP-HDMI adapter
(FIG. 5)
. It
connects to the Display end of these cables to interface with HDMI ports on some displays or
the AMX HDMI Extender (
FG558-21
).
FIG. 1
HDMI DIRECTIONAL FLAT CABLE
CBL-HDMI-FL2-16/32 CABLE SPECIFICATIONS
FG#:
• FG10-2192-16 - 16ft (5m)
• FG10-2192-32 - 32ft (10M)
Cable Length
• 16.4 ft or 32 ft (5m or 9.75m)
Connectors:
• SOURCE: HDMI (male) - connects to the source device.
• DISPLAY: HDMI (male) - connects to the display device.
• Molded Strain Relief
• MyTurn ready Over-Mold
Data Rate:
• 18 Gbps
Signal Support:
• 4K@60Hz
Color:
• 48 Bits (16 bits per color)
Supported Features:
• Deep Color, 3D, HEC, ARC
Plating:
• 24K Gold
CBL-ETH-FL2-16 CABLE SPECIFICATIONS
FG#:
• FG10-2194-16
Cable Length
• 16.4 ft (5m)
Connectors:
• RJ45 (male, both ends)
• Molded Strain Relief
Category:
• Cat6
Data Rate:
• 1000Base-T (Gigabit Ethernet)
Wiring:
• 26 AWG
• 4 twisted pairs
• Single-core
Plating:
• 24K Gold
FIG. 2
CAT6 ETHERNET FLAT CABLE
Display End
Source End
MyTurn-Ready Over-mold
RJ45
RJ45
Matte Black Cat6 Ethernet Flat Cable
FIG. 3
DP-DP DIRECTIONAL FLAT CABLE
CBL-DP-FL2-16 CABLE SPECIFICATIONS
FG#:
• FG10-2193-16 - 4K60 MyTurn Ready Flat Cable
Cable Length
• 16.4 ft (5m)
Connectors:
• SOURCE: DisplayPort (male) - connects to the source device
• DISPLAY: DisplayPort (male) - connects to the display device
• Molded Strain Relief
• MyTurn ready Over-Mold
Data Rate:
• 18 Gbps
Signal Support:
• 4K@60Hz
Color:
• 48 Bits (16 bits per color)
Supported Features:
• Deep Color, 3D
Plating:
• 24K Gold
Included:
• DP-HDMI adapter
FIG. 4
MINI DP-DP DIRECTIONAL FLAT CABLE
CBL-MDP-FL2-16 CABLE SPECIFICATIONS
FG#:
• FG10-2196-16 - 4K60 MyTurn Ready Flat Cable
Cable Length
• 16.4 ft (5m)
Connectors:
• SOURCE: mDP (male) - connects to the source device
• DISPLAY: DP (male) - connects to the display device
• Molded Strain Relief
• MyTurn ready Over-Mold
Data Rate:
• 18 Gbps
Signal Support:
• 4K@60Hz
Color:
• 48 Bits (16 bits per color)
Supported Features:
• Deep Color, 3D
Plating:
• 24K Gold
Included:
• DP-HDMI adapter
FIG. 5
DP-HDMI ADAPTER
MyTurn-Ready Over-mold
Release button
Source End
MyTurn-Ready Over-mold
Source End
Release button
