AMX ALR-AEC-8 ALERO, Instruction Manual, Page: 15 / 22

Configuration
10
Alero 8-Channel Microphone Mixer Instruction Manual
Configuration
When Alero is in operation, the user may change system configuration settings using a web based interface. To access the
configuration pages, open a web browser and enter the IP address for the device.
ex. http://192.168.12.34
Default login credentials are:

Username: admin

Password: admin
The configuration page is designed with a dashboard where the most relevant settings can be adjusted. There are five
configuration pages:

Network Configuration on page 10

Levels on page 11

Signal Mixing on page 12

Microphone Settings on page 15

Basic Configuration on page 16
Network Configuration
The default Alero IP and other network settings can be configured on the Network Configuration page (FIG. 22). On this page users
may also enable DHCP to have an IP address assigned by the network automatically.
NOTE: If the manual settings are bad, the device will not be accessible via a configuration page since the network connection will not
work. If this happens, follow the procedure Factory Reset on page 16 .
Reset Button
In powered on state, Alero’s factory reset button can be used to reset the IP settings to factory defaults to recover from some
misconfiguration, or to easily enable DHCP to switch to new network.

Short press (< 1 second): Reset to default static IP settings.

Long press (> 1 second): Enable DHCP.
Address Type Configured Address
IP Address 192.168.1.2
Gateway 192.168.1.1
Netmask 255.255.255.0
FIG. 22
Network Configuration Page