Product Information
1
ALD-D48 Network Lighting Solutions
Product Information
Overview
The ALD-D48 is the heart of an AMX integrated network lighting solution. The programatic
interface to the ALD-D48 appears similar to an AMX native device in that it utilizes a standard
AMX command set. When used with ALD dimmers and switches a complete Netlinx compatible
lighting system is formed.
Each ALD-D48 can support up to 48 ALD switches/dimmers (12 buses with 4 switches per bus).
Further, up to 10 ALD-D48s can be connected to one NetLinx master. This produces a "network" of
control for 480 switches/dimmers.
Specifications
The following table lists the specifications for the ALD-D48 and its related ALD dimmers and
switches.
ALD-D48 Specifications
Input Voltage
Input Frequency
Input Current
• 110-130VAC
• 60 Hz
• 0.21A rms
Weight
9.95 lbs (4.5 kg)
Enclosure Dimensions
17-1/4" x 10" x 3 - 7/16" (44 cm x 25 cm x 8.7 cm)
Connectors:
Configuration Port
DB9 male SERIAL port
ALD Buses
3 8-pin captive wire connectors for ALD dimmers and switches
Ethernet
10Base-T RJ-45 connects with the NetLinx system
Device Server LEDs:
Link
Green indicates network port is connected to the network.
Off indicates no network connection.
Net Tx/Rx
Yellow indicates network packets are transmitting and receiving.
Collision
Red indicates network collisions.
NetLinx Status
Solid red indicates no connection to the NetLinx master. This LED will blink red
every time a data packet is sent or received from the master. At a minimum it
should blink once every 5 seconds.
Lutron Status
Off indicates no connection to the ALD-D48. This LED will blink green every
time a data packet is received from the ALD-D48. This LED should blink
several times a second under normal operating conditions.
ALD-D48 LEDs:
Power
On indicates unit has power.
ALD Communications
On indicates connectivity of ALD switches.
Heartbeat
Flashes slowly when power is properly supplied.
Processor Communications
On or blinking when communications from the processor are uninterrupted.
DIP Switch
Always set the address of the ALD-D48 to 1.
Summary of Contents for ALD-1000D
