www.amulethotkey.com
DXG Quick Start Guide for VM640 v1.2 June 2018
QS-DXMG-0002
AMULET
HOTKEY
®
Quick Start Guide
dual-slot form factor
Graphics Virtualization Card for Dell 14G M-series blade servers
DXG
©2018 Amulet Hotkey Ltd. All rights reserved. Information in this document is subject to change. No part of this document may be reproduced through any means including (but not limited
to) electronic or mechanical, without express written permission from Amulet Hotkey Ltd. Amulet Hotkey Ltd may have patents, patent applications, trademarks or copyrights or other
intellectual property rights covering subject matter in this document. PC-over-IP, PCoIP and the PCoIP logo are registered trademarks of Teradici Corp. Amulet Hotkey and ‘solutions you can
bank on’ are registered trademarks of Amulet Hotkey Ltd. Other product names and company names listed within this document may be trademarks of their respective owners. Amulet
Hotkey products are designed and built in the UK.
Install the DXG into the mezzanine support bracket
1. Align the DXG for mezz slot B or C on the mezzanine support bracket.
Note:
The heatsink of the DXG covers both mezz connectors, and prevents
the installation of another mezannine card apart from a compatible NIC.
2. Turn the insertion tool so you can see the letters ‘DXG’ and locate the
insertion tool on top of the hexagonal spacers on the DXG. See
Figure 5
(
A).
3. Push down on the DXG insertion tool with the heel of your hand to install
the DXG. See
Figure 5
(B).
Figure 6:
Install the mezzanine board support clip
Power up the blade
1. Close the blade.
2. Push the blade into the chassis and power up.
Set up the DXG card
1. See Knowledge Base Articles KBA 113 and KBA 114 for details on how to set
up the DXG card after installation.
2. See our TechNote for details of the latest approved driver and software
versions.
Technical Support
Europe: [email protected]
N America: [email protected]
S America: [email protected]
Asia Pacific: [email protected]
More DXG Product documentation and downloads available
here
.
https://resources.amulethotkey.com/resources
You will need to download an electronic copy of this guide to make use of
the hyperlinks below.
Check the vendor websites for
NVIDIA
and
AMD
guides. In addition, see
NVIDIA
and
AMD
sites for drivers.
Note:
You must first purchase a GRID license to access the NVIDIA drivers.
Refer all servicing to qualified personnel.
For further information on this product, for other contact details, or for
details of our other products, see our website
www.amulethotkey.com
.
WARNING
To reduce the risk of fire or electric shock:
-
do not disassemble the unit;
-
make sure the unit is powered off before you remove
or install components;
-
do not expose this appliance to rain and moisture;
-
do not expose the appliance to dripping or splashing;
-
do not place objects filled with liquids on or near the
appliance.
CAUTION
-
Apart from those mentioned in this guide, there are no
user serviceable parts inside.
-
Install in accordance with these instructions.
-
Do not install near significant sources of heat.
-
Ensure the product is properly earthed.
-
Only use attachments and accessories approved by
Amulet Hotkey.
-
Clean the product only with a dry cloth.
Figure 5:
(A) Locate the insertion tool. (B) Push on the tool to install the DXG
4. Make sure the card sits level on the mezzanine support bracket.
5. Make sure the cable is routed through the cable management feature.
Install the mezzanine board support clip
1. Install the mezzanine board support clip on the edge of the blade chassis.
See
Figure 5
.
Note:
Install the clip on the near side to the slot where the DXG is installed.
A
B
Press
