5 Connecting the peripheral devices
Connect the keyboard, mouse, monitor and any other USB or audio components to the appropriate connectors on the Desktop unit as shown below. If
the desktop unit has provision for one or more PCI cards install them now.
6 Connecting power to the desktop unit
Connect the external power supply to the desktop unit. Locate the power cord that came with the desktop unit and plug one end into the IEC power
connector on the external power supply.
Do not switch on mains supply until the Desktop unit is connected to the external supply.
7 Installing the drivers
Once the computer boots, follow the operating system prompts for the installation of new hardware and system drivers. If you have provided your own
video card, refer to the card manufacture’s driver installation instructions.
www.amulethotkey.com
Installed PCI Add in card
right side
left side
rear
USB 2 peripherals
e.g. memory sticks / cameras
PCI slot for user graphics
card or other PCI card -
(not fitted to some models)
Audio i/o
PS/2 or USB
keyboard & mouse
embedded analogue / digital video
in some versions of the desk top
unit.
Cat 5, 5e, 6 or fibre
connection to back-
racked computer
to PSU
DDP2000 PCI Add-In card
Amulet Hotkey Ltd.
Suites 27-29
The Hop Exchange
24 Southwark Street
London SE1 1TY
t. +44 020 7407 2522
f. +44 020 7407 2523
Amulet Hotkey Inc.
11 Hanover Square
19th Floor
New York NY 10005
t. +1 212 269 9300
f. +1 212 269 9301
tech support:
Status LEDs
FLASH Access
- normally OFF
System link
- fully ON when system operating normally
Physical Link
- fully ON if system properly linked on 1Gbit cable
Power
- fully ON if power at both ends of link is on
Status LEDs*
*Note: these LED’s can light in other combinations. Refer to the full manual for full details.
