CoreModule MX Retention Bracket
Quick Start Guide
Health and Safety (Refer to legislation sheet LS-AHKL-0001)
•
This device complies with part 15 of the FCC Rules (Class A)
•
Operating temperature range: 15° to 30° C (59° to 86° F)
•
Operating humidity range: 10% to 80% (non-condensing)
For documentation, downloads and technical assistance, visit:
For further information on all our products, visit
© 2021 Amulet Hotkey Ltd. All rights reserved.
Information in this document is subject to change. No part of this document may be reproduced through any means including (but not limited to) electronic or
mechanical, without express written permission from Amulet Hotkey Ltd. Amulet Hotkey Ltd may have patents, patent applications, trademarks or copyrights or other
intellectual property rights covering subject matter in this document. PC-over-IP, PCoIP and the PCoIP logo are registered trademarks of Teradici Corp. Amulet Hotkey
and ‘solutions you can bank on’ are registered trademarks of Amulet Hotkey Ltd. Other product names and company names listed within this document may be
trademarks of their respective owners. Amulet Hotkey products are designed and built in the UK.
7. Install the retention brackets (left and right)
Locate the retention brackets on the guides.
8.
Hold catches open and replace the CoreModule cover
9.
Replace the CoreModule cover screws
10. Replace the CoreModule(s)
11.
Power on the sled(s)
Remember to migrate any VMs that were moved from the sleds
2
2
1
2
+
1
2
+
LEFT
RIGHT