Revise Date: 4/17/2016
n:\amtryke\manuals and instructions\accessories\knee adductor positioning strap\knee adductor positioning strap with new header.doc
Directions
1)
Place rider on tryke.
2)
Place the beige strap just above the knee under the thigh and bring the white strap loosely
over thigh to close the hook and loop. Note: There should be a one or two finger gap between
strap and thigh so that the strap can swivel when the knees are moving up and down on the
pedals.
3)
Determine the desired knee adductor positioning. Make strap adjustment using the directions
in Knee Adductor Positioning Strap Adjustments.
4) Secure strap on other side.
Knee Adductor Positioning Strap Adjustments
You can adjust the position of the knees when the rider is on the tryke by reducing the distance in
between the knees from wide to narrow by taking out one or two rows of stitching on the strap. To
shorten the distance between the knees, remove the row of stitching closest to the thigh.
Small Strap will adjust from 6 inches (widest) to 5 to 4 inches (narrowest)
Medium Strap will adjust from 9 inches (widest) to 8 to 7 inches (narrowest)
Large Strap will adjust from 12 inches (widest) to 11 to 10 to 9 inches (narrowest)
Cut off any extra beige strap once the fitting is complete, Making sure there is enough beige
strap so that the hook does not come in contact with the skin.
Beige strap
Row of stitching to remove for adjustments
White strap
Hook fastener
Hook fastener
Row of stitching
DO NOT REMOVE
