AmTryke 30-1500 Assembly Instructions Download Page 1

Page: 1 / 4

Revise Date: 6/24/09

Page 1 of 4

AmTryke Snappy Seat #30-1500

This seat may be used on the Snappy Tricycle (#50-0150), AM-9 models (#50-0102) and AM-12 (#50-0210 using

special mounting bracket #30-1503)

Carton Contents

Tools Required

1-Padded seat back

1-Seat Belt 1-5/32 Allen Wrench

1-Padded head rest 1-Metal seat bracket
1-Padded seat
2-Threaded seat knobs

Summary of Contents for 30-1500

Page 1: ...be used on the Snappy Tricycle 50 0150 AM 9 models 50 0102 and AM 12 50 0210 using special mounting bracket 30 1503 Carton Contents Tools Required 1 Padded seat back 1 Seat Belt 1 5 32 Allen Wrench 1...

Page 2: ...Allen wrench to tighten 2 Attach the metal seat bracket to the back side of the padded back using four Allen screws and four flat washers as shown Use a 5 32 Allen wrench to tighten Note Two round met...

Page 3: ...tach seat belt center strap with one Allen screw and a flat washer to bottom of padded seat as shown 7 Located on the bottom of the padded seat are eight pre drilled and threaded holes that are used f...

Page 4: ...Snappy Seat Small Laterals 30 1501 Large Laterals 30 1502 H harness 30 0336 11 5 inch H harness 30 0337 8 inch Adaptor bracket for mounting on AM 12 30 1503 Padded Head Rest Padded seat back Padded S...