Amtren FlexWriter SE4, Setup Manual

Page: 36 / 48

www.amtren.com Page 35
Click the “Play” button
to start, Sit back and
watch your newly cre-
ated work being pro-
duced automatically.
4.3 Play or Run FlexWare
Once the Wizard has step you through all the steps, FlexWare will display the screen as indicated
below. All items are preset based on the answers that you provided to the Wizard. You can review the
selections that the wizard made.
Click on the
PLAY button to begin the system.
The FlexWriter should move to the input spindle, pick up the 1
st
CD (your master) and place it into one
of the recorders. The image on the CD will be copied to the hard drive. Then the CD master will be
removed from the drive and placed on the output spindle. Then the FlexWriter will place a blank CD
from the input spindle into each of your CD recorders. Next, the image will be recorded onto the me-
dia. After that, the FlexWriter will pick up the recorded disc from one of the recorders and carry it to
the top of the column and wait for the disc printer to open. The recorded CD will be placed into the
printer tray. The empty recorder will be reloaded with a blank CD from the input spindle. The CD will
be printed. After printing, the FlexWriter will pick up the CD from the printer and place it on the output
spindle. This will repeat for each of your recorders. This cycle will continue until all copies are com-
pleted.
Please observe the operation and verify that everything works smoothly. If anything does not work,
back track and review your steps. If you cannot find the problem please call customer service and one
of our technical support staff will gladly assist.
To learn all the features of FlexWare, use the Wizard on each module. This will provide a quick