AMTC WR7502 User Manual Download

Page: 9 / 66

Chapter1 Product Overview

1.1 Introduction

WR7502 is simultaneous Dual Band, with maximum speed up to 300Mbps 2.4G and

433Mbps 5G Hz.The router can bandwidth control and parental control, and has 3

external antennas.



Complies with IEEE 802.11a/b/g/n/ac and IEE802.3/3u.



1 WAN port,4 LAN ports.



Provide one USB2.0 port supporting file sharing.



Provide WPA/WPA2, WPA-PSK/WPA2-PSK encryptions.



Support auto-negotiation and auto MDI/MDIX.



Support PPPoE, Dynamic IP, Static IP,PPTP,L2TP cable internet access.



Support UPnP, Dynamic DNS, Static routing.



Support Virtual server, special application and DMZ Host.



Built-in firewall supports IP address filtering Domain name filtering and MAC filtering.



Built-in DHCP server supports automatic and dynamic IP address distribution.

Summary of Contents for WR7502



































































Search results

Summary of Contents for WR7502

Reviews:

Related manuals for WR7502

Brands by name

Popular brands

AMTC WR7502, User Manual

Search results

Summary of Contents for WR7502

Reviews:

Related manuals for WR7502

Brands by name

Popular brands