AMTC Stratus 6 Zone Kit Installation and Operation Guide 10/5/2012
5 of 11
Operation:
The Main Display
Whenever you power on your radio, it will automatically tune to the last
channel you were listening to before it was powered off. The display
screen will show the channel number, the song or show being played, and the artist name of the current channel.
This screen is referred to as the main display screen in this guide.
Channel number
Artist name
Song title
Channel name
Alternatively, you may display the channel category instead of the channel name. To cause this, press and hold
menu
, then press
▼
to highlight
Display
, then press
Sel.
Again press
▼
to highlight
Category Name
, then again
press
Sel.
Press and hold
menu
again to exit.
Category name
Selecting a channel
Scrolling
When displaying the main screen, pressing and releasing
▲ or ▼ will cause the receiver to immediately tune to
the next or previous channel in the channel lineup.
Pressing and holding ▲ or ▼ continuously scrolls through the
channel lineup and briefly displays the information of each channel. When
the button is released, the radio tunes to the last channel it had scrolled to in
the channel lineup.
Direct tune
To directly tune a channel number, press
Sel
and then the channel number using
1-0.
Wait a moment until the
channel is tuned, or press
Sel
to immediately tune to the channel.
By category
To select a channel by category, press
◄ or ► to scroll through the available categories, then press ▲ or ▼ to
scroll through the channels in each category, then press
Sel
to select the highlighted channel.
