background image

13. 

Servicing: The user should never attempt to service the unit except as described 

in this manual. All other servicing should be referred to AMTC. 

 

 

Limited Warranty 

Applied Media Technologies Corpor

ation (“AMTC”) warrants this product against 

defective material and workmanship for a period of one year from the date of purchase. 
Except as specified below, this warrant covers parts and labor. The following are not 
covered by this warranty: 

1.  Damage, deterioration, malfunction or failure to meet performance specifications 
resulting from: 

a)  Accident, acts of nature, misuse, abuse, neglect or unauthorized product 
modification. 

b)  Improper installation, removal or maintenance, or failure to follow the 
instructions contained in the manual. 

c)  Repair or attempted repair by anyone other than AMTC, or its network of 
authorized installers. 

d)  Any shipment of this product (claims must be presented to the carrier)l 

e)  Any cause other than a product defect. 

2.  Cleaning, initial setup, check-ups with no defects found, or charges incurred for 
installation, removal or reinstallation of the product. 

3.  Any product on which the serial number has been defaced, modified or removed. 

4.  Accessories, including but not limited to, cables, mounting shelves or stands, 
detachable power cords, antenna and timer units. 

5.  Any product purchased outside the U.S.A, Its possessions or territories. 

6.  Compatibility of this product with any particular interface. 

This warranty may be enforced by the original purchaser. In the event this product 
needs service, contact AMTC at 1.800.741.AMTC (2682). We will advise you of proper 
procedure. Please do not return the product to AMTC without prior authorization. 
Whenever warranty service is required, you may be required to present original proof of 
purchase. All implied warranties, including warranties of merchantability and fitness for 
a particular purpose, are limited in duration to the length of this warranty. Liability for 
any defect is limited to repair or replacement of this product at the option of AMTC. 
AMTC shall not be liable for damage to other products caused by defects in this 
product, damages based on inconvenience or loss of use of this product, or any other 

Summary of Contents for EQ-AMP1500










Reviews: