www.amtelectronics.com www.amtelectronics.com
4
Page 1: ...vicing instructions are intended exclusively for qualified personnel Do not carry out any repair works not specified in the instruction manual All repair works are to be carried out by qualified personnel only Contents Important instructions 1 Complete set 1 Introduction 2 Before you start 2 Specifications 2 Power adapter low voltage contacts arrangement 2 Controls 3 Front panel 3 Rear panel 3 INP...
Page 2: ...hin the range of moderate gain levels It has individual controls for gain and output level the Bright switch and 3 band tone control Before you start For safe transportation the device was carefully packaged by the manufacturer However if the cardboard packaging is damaged you should immediately inspect the device for the absence of external damages In case of damages do NOT SEND the device to man...
Page 3: ...connection of your electric guitar to the preamp INPUTs priority INPUT located on the front panel has the priority in relation to INPUT located on the rear panel of the preamp I e in case of simultaneous connection to the inputs located on the front panel and the rear panel the preamp will operate with the signal coming to the front panel input When you disconnect the cable jack from the front pan...
Page 4: ...www amtelectronics com www amtelectronics com 4 ...