background image

10

Specifications

Receiver

Frequency Preparation                               

PLL Synthesized Control

Frequency Range                                         

600-952MHz

Region

 

dependent

Frequency Type                                            

F3E

Modulation Type                                           

FM

Channels                                                        

100(10x10)

Oscillation System                                       

VCO

Type of reception                                          

True Diversity

Receive Sensitivity                                     

 -11dBm (sinad

30dB)

Frequency Response                                  

60Hz-17KHz+/-3dB

S/N Ratio                                                        

105dB

T.H.D                                                                

<0.5% at 1KHz

Dynamic Range                                            

 >100dB

Operating Temperature                               

-10-+50

Display                                                            

Backlit LCD (63mm*22mm)

Audio Output                                                 

1*Balanced XLR Socket  1*6.35mm Jack

Antenna                                                          

2*BNC

Power Supply                                                

DC12V-18V/500mA

Dimensions( L*W*H)                                    

210*170*44mm

Handheld Transmitter

Frequency Preparation                               

PLL Synthesized Control

Frequency Range                                         

600-952MHz

Region

 

dependent

Frequency Deviation  

                                 ±48KHz

Microphone Type                                          

Dynamic

Polar Pattern                                                 

Cardioid

RF Output Power                                          

10mW

Controls                                                          

ON/MUTE/OFF

Indicators                                                       

Backlit LCD

Interface                                                         

Infrared

Power Supply    

                                            2*AA battery

Operating Voltage                                        

3V

Operating time                                              

10h (depending on batteries)

Dimensions                                                   

265mm

Summary of Contents for Quantum7




















Reviews: