www.amtelectronics.com
www.amtelectronics.com
2
2
INTRODUCTION
АМТ FS-2MIDI is designed to be used both in studio and during live performances.
AMT FS-2MIDI is a 2-button footswitch capable of switch control via
MIDI-interface.
With FS-2MIDI you can combine devices with standard footswitch-controlled
connectors and almost all modern devices having MIDI-interface into a single
complex in which the required presets or channels switching for all devices will be
carried out by a push of a button.
FS-2MIDI
allows:
- channels switching of external devices having corresponding control connector by
means of a footswitch or MIDI-control commands.
- managing parameters of external devices with a MIDI-interface, depending on the
current state of the device.
FS-2MIDI Features:
ü
Operating MIDI-devices via one of the 16 MIDI-channels (user adjustable);
ü
User-defined MIDI-command type: Control Change (CC) or Program Change
(PC);
ü
CC or PC command adjustment for each device state from 0 to 127;
ü
3 operational modes;
ü
Informative display;
ü
All parameters and adjustments as well as the device state are kept in the
nonvolatile memory of the device and are immediately restored when the
device is switched on;
ü
Additional connector for switching some of the AMT Electronics-made pedals,
allowing to use the device as a MIDI-converter;
ü
Compact and lightweight.
CAUTION! AMT FS-2MIDI like any other top class device is
very demanding when it comes to the power source quality.
We insist that you use the power adapter corresponding to
the necessary quality requirements (recommended: AC/DC Adapter
SA09DC-9V 1.11A or AC/DC Adapter SA12DC-12V 1.25A).
Before you start
To ensure safe transportation the unit was carefully packed at the manufacturing
facility. However, if the packaging box is damaged, you should immediately inspect
the unit visually for the lack of external damage.
Ø
If you detect any damages, please DO NOT send the device to
the manufacturer’s address, but notify the seller or
transportation company, otherwise you’ll lose your right to
compensation.
Ø
In order to avoid damages during storage or transportation
please use the original packaging at all times.
Ø
Do not allow children to play with the device or the packaging.
Ø
Please recycle all packaging materials to avoid any harm to
environment.
Ø
To avoid the device overheating provide sufficient air
circulation around it. Do not cover it and don’t place it close to
heat-emitting sources.
Ø
Using the device near powerful radio transmitters and high
frequency
sources
might
result
in
MIDI-interface
malfunctioning. If this is the case, increase the distance
between the device and transmitter and use shielded cables for
all connections.
SPECIFICATIONS
Output FSW 1&2 OUT
Max resistance of relay contacts
0.1
Ω
Max current via contacts
1 А
MIDI interface
MIDI channels
1-16
Control Change commands
0-127
Program Change commands
0-127
Power supply
Voltage
9-12 VDC
Current consumption
0.12А
Power adapter (option)
Recommended:
AC/DC Adapter SA09DC-9V 1.11A
AC/DC Adapter SA12DC-12V 1.25A
Voltage
9-12 VDC
Dimensions / Weight
NET dimensions (WхHхD).
111х52х67 mm
NET weight
0.21 kg
Overall dimensions (WхHхD).
Approx. 125х83х103mm
GROSS weight
Approx. 0.3 kg
Use
only
auxiliary
devices
and
accessories
recommended by the manufacturer.
CONTROLS
Top panel
1.
1 / DOWN / EDIT C.L.
– footswitch left button used for
TIP-
SLEEVE
contacts switching control in
FSW 1&2 OUT
connector in
main mode. In parameter mode adjustment – the adjustable
parameter decrease.
2.
Indicator of closed contacts
TIP-SLEEVE
in
FSW 1&2 OUT
connector
.
3.
Indicator of closed contacts
RING-SLEEVE
in
FSW 1&2 OUT
connector
.
4.
2 / UP / EDIT C.R.
– footswitch right button used for
RING-
SLEEVE
contacts switching control in
FSW 1&2 OUT
connector in
man mode. In parameter adjustment mode – adjustable parameter
increase.
5.
Indicator.
6.
MIDI OUT
– device MIDI-interface output.
7.
CONTROL INPUT
– input connector for switching AMT-made
devices equipped with a corresponding connector.
8.
FSW 1&2 OUT
–channels control output for the devices
equipped with control connectors (connection by means of a 3-wire
cable tipped with 6.3 mm stereo jacks).
9.
IN DC 9-12V
– power adapter connector.
10. MIDI IN
– device MIDI-interface input.
Only for qualified personnel.
There are no user-serviceable parts inside the device. The
device must be repaired only by qualified specialists.
