AMT 8200-000, Service Manual

Page: 8 / 192

1 1 Basic safety instructions
8 / 192
1 Basic safety instructions
This document applies to the software version stated on the title page.
Product names may occur in the document , which are added for identification
purposes only and belong to the respective owner of the rights.
• The applicable regulations and safety measures must be complied, when handling
the gases used.
• The inert gas, helium, has an asphyxiating effect in large concentrations.
• The test objects and the gas fittings must be capable of withstanding the applied
pressure differential.
• For repair, sent- i n products must be free of pollutants, (e.g. radioactive, toxic, or
caustic or b i olog i cal substances).
Otherwise the type of contamination must be declared. (For a Declaration of
Decontamination form, refer to the operating instructions of the device. Additional
forms are available at your service point.)
The mains filter, the power supply unit, the wiring board and the backing pump
contain parts that are supplied with a voltage of 230 V or 115 V). lt is, therefore,
necessary to always pull the mains plug before opening the device.
A DANGER
Imminent hazard resulting in death or serious injuries
�WARNING
Hazardous situation resulting in potential death or serious injuries
�CAUTION
Hazardous situation resulting in minor injuries
NOTICE
Hazardous situation resulting in damage to property or the environment
1.1 Target group
This manual is aimed at trained and qualified specialists. All work on the device and
the handling of this manual require the necessary expertise in the handling of
electrical, mechanical
, pneumatic and vacuum equipment.
Service Manual LX2 1 8-04- (1 9 1 2 )