AM8044 Cascade VCF & VCA
AMSynths
Page 7
5
Configuration
The AM8044 module occupies 14HP of EuroRack space and
is fully compatible with various Euro Rack cases, especially
Doepfer. The height of the panel is 128.5 mm and there
are four mounting holes at each corner of the module.
Four 3mm diameter mounting screws and washers are
included with the AM8044 to enable you to securely mount
the module into your rack.
The module should be connected to the 12V Doepfer style
power bus within your case using the included AMSynths
multi-way power cable. Ensure the power is OFF before
connecting the module and BE VERY CAREFUL to ensure
that the power connector to the bus is connected with the
red stripe of the cable lined up with -12V (negative 12V).
This is standard Euro Rack power connection but be VERY
CAREFUL to get this right! Damaged modules will not be
replaced under warranty when the power has been
misconnected. The power socket on the AMSynths module
is keyed so that the cable can only be inserted the correct
way.
