Operation
Start
Plug into and switch on the Power Supply
If using an Amstrad CM14 or MM12 -plug in and switch on the monitor.
If using your television –plug in the AC adapter and switch on.
Load the cartridge into the Console
Do not use unnecessary force, check you are not trying to insert the cartridge upside
down.
Switch on the Console
Use the power/interlock switch. This switches the console on and locks the cartridge
into position. NEVER USE FORCE - SWITCH OFF THE CONSOLE BEFORE
LOADING OR ULOADING A CARTRIDGE.
Adjust the picture
Adjust your monitor to get a clear image on the screen, if you are using a television you
will need to tune it:
Select a spare or unused channel then adjust the tuning control or if your television
has a rotary programme selector knob turn it until the image on the screen becomes
steady (the signal will be approximately at channel 36).
Adjust the sound
Adjust the volume control as required. If there are no game sounds -adjust the sound
switch on the games console.
Pause
Press the pause button to freeze the game. Press it again to continue.
Stop
When you want to stop a game switch off using the Interlock/power switch and then
remove the cartridge – DO NOT ATTEMPT TO REMOVE A CARTRIDGE BEFORE
SWITCHING OFF.
5
