manualshive.com logo in svg

AMSTRAD CPC464, User Manual

Share
Download
AMSTRAD CPC464 User Manual Download Page 189

9.3 Interrupts 

 
The CPC464 makes extensive use of the Z8O interrupt structure to provide an operating system that 

includes several multitasking features as exemplified by the AFTER and EVERY structure described 
in chapter 8. The precedence of the interrupts is: 
 

Break 

[ESC][ESC]

 

Timer 3 

Timer 2 (and the three sound channel queues). 

Timer 1 

Timer 0 

 

Interrupts  should  be  included  after  considering  the  consequences  of  all  the  possible  intermediate 

variable states at the point of interruption. The interrupt subroutine itself should avoid unwanted 

interaction with the state of variable in the main program. 

The sound queues have indepedant interrupts of equal priority. Once a sound interrupt has started, 

it is not interrupted by any other - enabling sound commands to share variables with immunity from 

the effects mentioned above for the timer interrupt’s structure. 
When a sound queue’s interrupt is enabled, it will immediately interrupt if the sound queue for that 

channel is not full, otherwise it will interrupt when the next sound starts and there is room for more 

in the queue. The action of interrupting disables the event, so the subroutine must re-enable it if 

further interrupts are required. Attempting to issue a sound or testing the queue status will also 

disable any event. 
The priority of the 

[ESC] [ESC] 

sequence above all other interrupts ensures that BASIC program 

operation can be halted without loss of the program - provided no ancillary action has been taken to 

ensure the integrity of the program through one of the various protection techniques. 
 
 

9.3 AMSOFT Assembler 
 

In order to program extensively using machine code, it will be necessary to use an assembler. The 

AMSOFT assembler comprises a relocatable Z80 assembler, with editor, disassembler and monitor. 

Summary of Contents for CPC464


























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands