AMSEC ESL20 Operating Instructions Download Page 3

Page: 3 / 4

American Security Product Co.

Document Part No. 4305149, Revision C

18 Sept. 2000

A function is set in the following standard format:

C - # - (2 Digit Function Code) - # - (Master User Code) - # - (Function Setting) - #

↑

SGCT

↑

SGCT

↑

SGCT

↑

LGCT

After each “#”, a Short Good Combo Tone (

SGCT

) will be given, until the last “#” of the sequence is

pressed, at which time it gives a Long Good Combo Tone (L

GCT

) indicating the successful setting

of a function. Any time during the sequence, if incorrect numbers are pressed, a Bad Combo Tone
(4 short beeps) will sound and the lock will go to rest. A function that has an on/off condition rather
than a numeric setting requires a

(on) or a

(off) as the Function Setting.

Note

: If a default setting is what is desired, then the setting of that function is not necessary.

5.1 Time Delay Settings (Functions 01, 02 & 03)

  5.1.1   To Enable Time Delay:

        C - # - 01 - # - (Master Code) - # - 1 - #

  5.1.2   To Disable Time Delay:

        C - # - 01 - # - (Master Code) - # - 0 - #

  5.1.3   To set the Delay Period:

        C - # - 02 - # - (Master Code) - # - (Delay Period, 1-99 minutes) - #

  5.1.4   To set the Open Period:

        C - # - 03 - # - (Master Code) - # - (Open Period, 1-9 minutes) - #

Time Delay Setting Example

. To set Time Delay for 12 minutes, Open Period to 4 minutes and

the Master Combo is 159260, you must execute 3 function codes as follows:

1. First, Enable the Time Delay with

C-#-01-#-159260-#-1-#

2. Then, set the Delay Period with

C-#-02-#-159260-#-12-#

3. And finally set the Open Period with

C-#-03-#-159260-#-4-#

5.2

Multiple User Settings (Functions 10, 11, 12 & 13)

  5.2.1   To Enable Multiple User Mode:

        C - # - 10 - # - (Master Code) - # - 1 - #

  5.2.2   To Disable Multiple User Mode:

        C - # - 10 - # - (Master Code) - # - 0 - #

  5.2.3   To Add or Enable a Subordinate User:

        C - # - 11 - # - (Master Code) - # - (User Number, 1-8) - #

  5.2.4   To Disable a Subordinate User:

        C - # - 12 - # - (Master Code) - # - (User Number, 1-8) - #

5.2.5 To Disable all Subordinate Users (1-8):

C - # - 13 - # - (Master Code) - # - 1 - #

Note

: Disabling a Subordinate User does not erase the combo associated to that user, so if you

re-enable that User number it is not necessary to re-enter a combo for it unless you are
treating it as a new user.

Enabling Multi-User Mode and Adding a New User Example

. To add a User 3 and set a

combination for that User, the Master Combo is 159260 and set User 3 combo to 121314:

1. First, Enable Multiple User Mode with

C-#-10-#-159260-#-1-#

2. Then, Add User 3 with

C-#-11-#-159260-#-3-#

3. And finally set a combo for User 3

C-#-3-#-159260-#-121314-#-121314-#

5.3

Duress Alarm (Function 20)

  5.3.1   To Enable Duress Mode:

        C - # - 20 - # - (Master Code) - # - 1 - #

  5.3.2   To Disable Duress Mode:

        C - # - 20 - # - (Master Code) - # - 0 - #

5.4

Dual Combo (Functions 30 & 31)

5.4.1 To Enable Dual Combo Mode:

C - # - 30 - # - (Master Code) - # - 1 - #

Note

: Enabling Dual Combo Mode turns on (enables) User 1 if a User 1 is not already active in

Multi-User mode

. The User 1 combo must be set before this feature will function

. See

Section 4 for changing instructions.

  5.4.2   To Disable Dual Combo Mode:

        C - # - 30 - # - (Master Code) - # - 0 - #

  5.4.3   To Enable 2 Subordinate User Opening in Dual Combo Mode:

        C - # - 31 - # - (Master Code) - # - 1 - #

  5.4.4   To Disable 2 Subordinate User Opening in Dual Combo Mode:

        C - # - 31 - # - (Master Code) - # - 0 - #

5.5

Armored Car TDL Bypass (Functions 40 & 41)

5.5.1 To Enable Armored Car TDL Bypass:

C - # - 40 - # - (Master Code) - # - 1 - #

Note

: Enabling Armored Car Bypass turns on (enables) User 9, which is the Armored Car User

The User 9 combo must be set before this feature will function

. See Section 4 for

changing instructions.

Summary of Contents for ESL20

Page 1: ...ed within 10 seconds the lock goes to the resting condition and the process must be started again 1 4 Armored Car Time Delay Bypass This feature allows Time Delay to be used under normal access situations but provides a means to bypass time delay when cash handling methods require that an Armored Car courier can take deposits without waiting for the delayed access It still requires that a valid re...

Page 2: ...ngths of an electronic safe lock is the quick and easy changing of the combination s This adds to security because you can change it at will if you suspect your combination is known by others The combination change method for the Primary code Master User can be done two ways with or without a User Number All combination changes require and authorization code and two entries of the new combo as ver...

Page 3: ... Multiple User Mode C 10 Master Code 0 5 2 3 To Add or Enable a Subordinate User C 11 Master Code User Number 1 8 5 2 4 To Disable a Subordinate User C 12 Master Code User Number 1 8 5 2 5 To Disable all Subordinate Users 1 8 C 13 Master Code 1 Note Disabling a Subordinate User does not erase the combo associated to that user so if you re enable that User number it is not necessary to re enter a c...

Page 4: ...alid combo s are necessary to cause lock opening 6 2 Armored Car Code Dual Combo and Time Delay Armored Car TDL Bypass only allows the bypassing of Time Delay Two valid User codes are still necessary to open the lock even the when Armored Car Code is used to bypass Time Delay 6 3 Duress Alarm output will be caused any time the Duress code is entered by any User during opening or starting of Time D...

Search results

Summary of Contents for ESL20

Reviews:

AMSEC ESL20, Operating Instructions, Page: 3 / 4

Search results

Summary of Contents for ESL20

Reviews: