Your AMSEC electronic safe lock is professionally hand-crafted with quality materials and is equipped
with a precision-quality, ESL10XL digital lock. To become familiar with the lock, operate the lock (as
outlined below) several times before closing the door and locking the safe.
OPERATION INSTRUCTIONS:
•
Don’t slam the door. Extreme shock can damage the lock or jam the boltwork.
•
Don’t shut the door with the boltwork in the locked position. Damage to the boltwork and marring
the safe’s finish may result.
•
Don’t stack contents of the safe so that the door must be forced shut. Jamming of the boltwork
may result.
•
Don’t store the combination card inside the safe.
•
Don’t use oil, grease or any other lubricant on the digital lock.
•
Keep all moving parts clean and free from obstruction, water and grease.
•
If you experience a difference in the feel of the operation, inconsistency or difficulty opening or
operating the safe, DO NOT LOCK THE SAFE. Immediately contact the security store from whom
you purchased the safe. If this is not practical, contact the AMSEC service department at
951-685-9680, Ext. 1036.
ESL10XL Electronic Lock
To open the battery
compartment on the
ESL10XL lock, twist the
lock face to the left and
remove. The battery is
located inside the lock.
