4. DELETINg USERS (THIS WILL DELETE ALL USERS)
Open the safe door and locate the red button. The red button should be located on the door
hinge side of the safe door.
Press and hold the Red Button. When the display says, “Delete Finger” place your finger
on the biometric sensor. Note: The red button must be held down the whole time.
The display will read “Delete Ok”. All users have now been deleted.
The Lock can now be opened just by pressing the silver button on the front of lock. No enrolled
fingerprint will be required to operate the lock.
Set up a New User as stated in Step #1.
5. HOW TO OPEN IN AN EMERgENCY
Locate the “AMSEC” logo plate just down and to the right of the biometric lock.
Using a screwdriver, remove the 2 screws holding the plate, to reveal the emergency lock.
Use the emergency key to open the safe door.
6. BATTERY OVERRIDE:
If after pressing the silver button
the reader screen flashes, this is an
indication that the batteries are low.
Using the Power Override Box, plug
the cable terminal into the port on
the underside of the fingerprint
reader. Press the silver button and
place your finger on the Biometric
sensor to open the safe.
Remove the battery cover on the back of the door and replace with (4) AA (1.5 volt) Alkaline
batteries.
PLEASE kEEP THE EMERgENCY kEYS IN A SAFE PLACE
BUT NOT IN THE SAFE!
1.
2.
3.
4.
5.
1.
2.
3.
1.
2.
3.
