ABBREVIATED COMPONENT MAINTENANCE MANUAL
P/N 504414-SERIES
PAGE 9 OF 42
June 9, 2014
Rev. 2
25-20-217
Use or disclosure of information on this page is subject to the restrictions on the title page of this document
DESCRIPTION AND OPERATION
1.
Description (see Figure 1.)
The restraint system consists of the following major assemblies:
Shoulder Strap
Lap Belt Assy
The restraint system assemblies come together at a common attachment point.
All of the belts and straps are made from nylon webbing. The lap belt is fitted with a fixed buckle and an
adjustable connector. The ends of the lap belts, which attach to the seat or aircraft, are fitted with end
fittings. Leading particulars for the restraint system are listed in Table 1.
The restraint system is hard mounted directly on the seat or aircraft structure in accordance with the
installation instructions supplied by the seat manufacturer.
Use .................................................................................................................. Personnel Restraint
Type ..................................................................................................................... Restraint System
Shoulder Strap:
Type ....................................................................................................
Automatic Inertia Reel
Locking Acceleration ......................................................................................................... 2.5g
Lap Belt Assembly:
Rated Strength (minimum) ....................................................................... 3000 lbs. (1361 kg)
Leading Particulars
Table 1
The document reference is online, please check the correspondence between the online documentation and the printed version.