TDC-GPX2 Standard Board
ams Eval Kit Manual
Page 5
[v1-00] 2016-Oct-20
Document Feedback
Connect the power supply. Make sure it is set to 6 V supply voltage.
The green LED on the evaluation kit should be on.
Connect your signal source.
2.3
Software
Excecute the GPX2 Frontpanel software. The communication status should be green
The software starts with an initial configuration, that can be opened the default configuration
file config_default.cfg.
Press “Power On Reset! – “Write Config” – “Init Reset”
Press “Start Measurement”
The measurement should run and results should be displayed now.
