SCRAM Remote Breath
Most fl exible option in breath alcohol testing!
14
Blow into the breath tube at a consistent
2.
air volume.
Continue to blow until
3.
STOP is displayed.
At this time:
The device displays
»
ANALYZING DATA,
communicates with SCRAM
NET
, then
transmits the data.
Once analysis is complete, the device
»
displays TEST COMPLETE.
After a few moments, the device dis-
»
plays BEGIN PRACTICE TEST.
7. Verify the quality of the enrollment photograph in
SCRAM
NET
.
8. To complete the enrollment process, you can ei-
ther:
Press and hold the
•
Power button for approxi-
mately fi ve seconds until SHUTTING DOWN is
displayed.
Wait for fi ve minutes of inactivity, when the
•
device will shut down by itself.
I
NITIATE
O
N
-D
EMAND
T
EST
To start an on-demand test from the client’s RB Sched-
ule page:
Click the
1.
On Demand button.
The Initiate On Demand Test pop-up window ap-
pears.
After reading the information, click the
2.
Continue
button.
The
3.
On Demand button disappears and the words
“On Demand Pending” appear. Within 20 minutes,
the device gives the client an audio indication to
take a test and the message “On Demand - Pend-
ing” changes to “On Demand - Awaiting Results”.