AMS AS3933, Description, Page: 6 / 21

AS3933-AN01
Demoboard Description
www.ams.com Revision 1.1/ 24/02/13 page 6/20
Jumper Name Description Info
E2 SCL Serial Digital Interface Clock
E3 SDI Serial Digital Interface Input
E4 SDO Serial Digital Interface Output
E5 GND Ground (0V)
Note: When the AS3933 Demoboard is connected to the GUI it is necessary to RESET the device
by turning the AS3933 off and on via switch C. Another possibility to prepare the Demoboard for
USB connection is to press buttons A and B simultaneously before connecting the USB cable.
4.2 125kHz Wake-up Transmitter Board
Figure 5: 125kHz Wake-up Transmitter Board
Figure 6: User Interface Description
Label Name Description Info
A PATT+DATA Data –
Button The transmitter continuously sends the wake-up
pattern plus data (01010101).
B PATT Single-Pattern –
Button The transmitter sends a single wake-up pattern.
C AUTO Automatic Pattern –
Button The transmitter sends a wake-up pattern every 1s.
D STOP Stop Pattern –
Button The transmitter stops transmitting.
E USB-
Connector Mini USB 5-pin
connector USB interface for the GUI.
F Power Supply +9V/2A DC Power
Supply Insert main power adapter here.
E A B C D
F