2825R-XX SERIES TWO DIVER RACK
MOUNT COMMUNICATOR USER MANUAL
282XR-UM
REV 5.0
26
5.4.9
Push-To-Talk Does Not Work
If used, check the connection to the handheld microphone. A common issue is that
the yellow banana plug is not properly seated in the PUSH-TO-TALK JACK. If the
tender is using the PANEL SPEAKER as the microphone with the PUSH-TO-TALK
BUTTON, make sure the SPEAKER SWITCH is turned on. If neither of these
solves the problem, there could be a broken wire inside the diver communicator.
Open the front panel and inspect all wire connections. If that does not resolve the
problem then contact Amron for further assistance.
6 DRAWINGS
The following drawings illustrate the electrical and mechanical details of the diver communication unit.
The corresponding parts lists for each drawing are detailed in the parts lists section, or are included
as part of the drawing. All drawings are at their current revision level as of the date of printing. Amron
reserves the rights to revise the documentation without notification.
Summary of Contents for AMCON II 2825R Series
Page 2: ......