Amron 2830A/24 Series, User Manual

Page: 29 / 60

MODEL 2830A USER MANUAL
2830A UM REV 3.0
26
6.3.1.2 WEEKLY MAINTENANCE
Wipe off any accumulated salt or salt spray on the front panel or connectors using a
clean, damp cloth. Pay particular attention to where the various front panel
components attach to the panel. Inspect the outer case for any damage.

Inspect the PUSH-TO-TALK BUTTON, binding posts and volume
controls for smooth operation.

Inspect the case lid O-ring for any damage and replace if necessary.
6.3.1.3 6 MONTH CHECK
Wipe off any accumulated salt or salt spray on the front panel or connectors using a
clean, damp cloth. Pay particular attention to where the various front panel
components attach to the panel. Inspect the outer case for any damage.

Inspect the PUSH-TO-TALK BUTTON, binding posts and volume
controls for smooth operation.

Inspect the case lid O-ring for any damage and replace if necessary.

Inspect the front panel gasket for any damage and replace if
necessary.

Perform the 2-Wire and Full Duplex (4-Wire) system checks as
described in Section 6.1.1 & 6.1.2.
6.3.1.4 YEARLY CHECK
For maximum service life, it is recommended that the diver communicator be sent
back to Amron for a yearly check.
6.3.1.5 LONG TERM STORAGE
If the diver communicator is to be stored for a period greater than 30 days, it is
recommended that it be stored in a cool dry location. Make sure that the POWER
SWITCH is turned off during storage. The 2830A communicator should be stored
connected to AC power to ensure the communicator will be fully charged and ready
to use when needed.