6.1.10.1Add an Analog PSTN Trunk
1.
Click the
Add New
tab.
2.
Enter settings shown in Table 6 -29.
3.
Click
Add
to see the newly added Analog PSTN trunk in
Trunk Group
.
6.1.10.2Edit an Analog PSTN Trunk
1.
Click a trunk group in
Trunk Group
.
2.
Enter settings shown in Table 6 -29.
3.
Click
Apply
to change the information.
6.1.10.3Delete an Analog PSTN Trunk
1.
Click the
Trunks
tab, and select a trunk group.
2.
Click
Del
to remove the PSTN trunk from the
Trunk Group
.
Table 6-29 Analog PSTN Trunk Configuration Settings
Field
Description
Trunk Group
ID number of this PSTN trunk group. A valid number
ranges from 1 to 31. It should not overlap with existing
ISDN PSTN trunk groups.
Trunk Type
Select the port type, FXO or FXS.
Trunk Ports
Select one or more FXO or FXS ports for this Analog
PSTN trunk.
Description
Arbitrary description information.
Port Selection
Click to search for an available port in the group.
Rotating means to force ports being selected by turns
to even cost.
Language
Preferred language for system instructions heard from
the trunk.
DID Type
If selecting FXO, user can see None DID, Extension DID
and DID By Privilege in the DID Type list. If selecting
FXS, users can see None DID, Extension DID and DID
By Privilege in the DID Type list.
None DID
When selected None DID, all incoming calls will enter
IVR system instead of directly dial to a specified
extension. Select a preferred IVR from IVR list for this
trunk.
77
