Amroad DP3211, Installation Manual, Page: 7 / 15

AMROAD DP3211
4
Installing Procedures
Back Plate
1. Make sure that is able to let the Power
Cord, GPIO wires, Ethernet cable, and
Ground Wire pass through the hole. The
bottom of standard wall box is height
148cm from the floor.
2. Connect the ground wire to the Back Plate.
3. Use Wall Mounted Screw Pack to fix Back
Plate on the wall as shown above.
Notice
：
Do not force overload when fastening the Back
Plate. Otherwise, Back Plate will be out of
shape and install Main Unit failed.
Installing Procedures
Back Plate