accessing the weB-server
1.
Input the ip address of your device in your browser. A landing page will appear.
2.
Press the
login
button.
3.
Input
Login id
and
Password
then press the
login
button again to confirm.
The default id and password are:
Login id
:
admin
,
Password
:
admin
network settings
1.
Choose the
ip type
from
dhcp
,
static
and
PPPoE
.
2.
Fill in all the related parameters (for further explainations, please refer to the user manual).
3.
Save the new settings.
live streaming
1.
By entering
“Doorphone”
in the field called
Display Name
, when the bell button is pressed,
you will hear a bell sound, and you will have the Picture Preview function on all Amroad’s
indoor stations and video phones.
2.
Preview Multicast
- By selecting
Enable
, your indoor station will display a live video image
whenever somebody presses the bell button.
siP settings
1.
Display Name
-
This name will be shown on the ip phones of called parties.
2.
Sip proxy server \ Service
-
By selecting
Enable
, you will connect in sip mode while, by
selecting
Disable
you will connect in Peer-to-Peer mode.
configuring the device
connecting electronic Bolts & strikes
resetting the device
finding amroad dB3100r on the network
1.
Connect your computer to the local network.
2.
Execute the utility called
Amroad search tool.exe”
(provided by your dealer).
3.
Press the
search
button in order to scan the whole network segment. A list will appear.
4.
Your device is called
“Doorphone-db3100r”
and it has a unique mac address (also written on
the side of the unit and on the packaging).
5.
Copy the corresponding ip address.
There is a reset button on the back of the device.
A.
If you press it for 3 seconds, the device will switch to the static ip mode as
“192.168.0.50 “
and reboot itself.
B.
If you press it for more than 6 seconds, the device will switch to the dhcp mode and reboot
itself (you will restore the factory setting).
connecting an electronic Bolt
Electronic bolts are usually used in public spaces in order to open doors in case of emergencies.
Electronic bolts close doors wh12V is supplied.
When the wire connection is completed, we need to set the
Device Relay Output
option to
Positive
on the
gpio
page
of the
Entrance Settings
.
When the wire connection is completed, we need to set the
Device Relay Output
option to
Negative
on the
gpio
page of the
Entrance Settings
.
You may continue to configure the web-server according to your requirements.
connecting an electronic strike
Electronic strikes are commonly used in private houses so that doors remain closed during
blackouts. Electronic strikes open doors wh12V is supplied.
