AMREL RF9 User Guide
Chapter Four - 33
BIOS Setup
Advanced Menu Selections
You can make the following selections on the Advanced Menu.
Feature Options
Description
Boot-time
Diagnostic Screen
Enable
Disabled
Display the diagnostic screen during
boot
QuickBoot Mode
Enable
Disabled
Allows the system to skip certain tests
while booting. This will decrease the time
needed to boot the system.
PS/2 Mouse
Auto Detect
Disabled
Enabled
“Disabled” prevents any installed PS/2
mouse from functioning, but frees up IRQ
12. “Enabled” forces the PS/2 mouse
port to be enabled regardless if a mouse
is present. “Auto Detect” will enable the
PS/2 mouse only if present. “OS
Controlled” only displayed if the OS
controls the mouse.
Device 29 USB
2.0 Enable
Enable
Disabled
Enables Device 29 USB 2.0 functionality.
Passive Cooling
Trip Point
15 C/23 C/31 C/39 C/
47 C/55 C/63 C/71 C/
79 C/87 C/95 C/103 C/
109 C/111C
Disabled
This value controls the temperature of
the ACPI Passive Trip Point – the point in
which the OS will begin throttling the
CPU.
Note: When the DTS is enabled, only
values below 97C are valid.
Core
Multi-Processing
Enable
Disabled
Determines whether the 2nd core is
enabled.
Disabled = 2nd core is disabled.
Enabled = 2nd core is enabled.
Intel(R)
SpeedStep (tm)
Enable
Disabled
Allows more than two freq. range to be
supported
CX States
Enabled
Disabled
Enable CPU C-states: Main switch for
C0, C1, C2, C3, C4, Deep C4, C6
DVMT
Pre-Allocated
32 MB
64 MB
128 MB
Select DVMT Pre-Allocated (Fixed)
Graphics Memory size used by the
Internal Graphics Device.
Total Graphics
Memory
128 MB
256 MB
MaxDVMT
Select the amount of Total Graphics
Memory- Pre-All Fixed + DVMT
for use by the Internal Graphics Device.