Getting Started
2
Quick Operation
-
Loosen the battery screw, remove the battery insulation sheet, and mount the
battery.
-
Attach the AC adapter and charge battery for at least 10 minutes.
Turn ON the computer by pressing the power switch momentarily.
Notice:
-
When ambient temperature is under 0
℃
, the system may not boot up
immediately. System will beep with heater light flashing while heater
working. After 10~15 minutes, the system will boot up automatically.
-
Under emergency situation, to skip heating and boot up system immediately
by pressing power button for >10 seconds. (But can not guarantee all devices
on the computer work properly)
-
Turn OFF the computer using either one of the following procedures:
1.
Press power switch to “Shut Down”, “Standby”* or “Hibernate”*
dependent on operating system (OS) and power management settings.
2.
Press power switch for 4 seconds for a “Hard” power off. System shuts
down immediately without saving any data or parameters.
*:
Some operating systems may not support these functions.
3.
Click
Start
Shut Down
in Windows to
Turn OFF.
Driver or application software installation may be necessary for further operation.