AMOBI DESK
INSTALLATION GUIDE | 6
amqsolutions.com
Using controls on LED Task Light
1 . Press the button with the bulb icon once to either
switch the LED light on or off .
2 . Long press the button with the bulb icon to adjust the
brightness of the LED light . Brightness will go from
100% to 5% and then 5% to 100% . Let go of the button
if desired brightness is achieved .
3 . When the LED light is switched on later again, the light
brightness will be the last programmed brightness
setting .
Using LED Task Light controls on Amobi Desk front handset
1 . Press the ON/OFF button on the front handset once to either switch the LED light on or off .
2 . Long press the Variable Dimmer button to adjust the brightness of the LED light . Brightness will go from
100% to 5% and then 5% to 100% . Let go of the button if desired brightness is achieved .
Occupancy Sensor
1 . Occupancy Sensor will only function after the LED Task Light is switched ‘ON’ and is in Standby mode .
2 . When a person moves within the range of 0 - 8 .2 ft at an angle of 120°, the LED light will automatically
switch on .
3 . When the Occupancy Sensor do not detect any activities within 30 minutes, the LED light will
automatically switch off .
LED TASK LIGHT CONTROL BUTTONS
ON/OFF
button
ON/OFF button
Variable Dimmer
LED
120°
8.2 ft