AMPTRON M810D Series, User Manual

Page: 17 / 40

2: Mainboard Installation
13
1
Install the Mainboard
Install the mainboard in a system chassis (case). The board is a
Micro ATX size mainboard with a twin-tier of I/O ports. You can
install this mainboard in an ATX case. Ensure that your case has an
I/O cover plate that matches the ports on this mainboard.
Install the mainboard in a case. Follow the instructions provided by
the case manufacturer using the hardware and internal mounting
points on the chassis.
Connect the power connector from the power supply to the
ATX_PWR connector on the mainboard.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the
SYSFAN fan power connector on
the mainboard.
Connect the cable from the PC speaker to the
SPK1 header on the
mainboard.
Pin Signal Pin Signal
1 SPKR 2 NC
3 GND 4 +5V
SYSFAN
ATX_PWR
AUDIO1
SPK1
1
SW1
1