Load Best Performance Defaults
35
PCI Master 0 WS
Write
This item defines a timing parameter for the PCI
bus. Leave this item at the default value.
PCI Delay
Transaction
This item can be enabled if the system has an
embedded 32-bit write buffer to support delay
transaction cycles. Leave this item at the
default value.
PCI#2 Access #1
Retry
This item defines a timing parameter for the PCI
bus. Leave this item at the default value.
AGP Master 1 WS
Write
This item defines a timing parameter for the
AGP bus. Leave this item at the default value.
AGP Master 1 WS
Read
This item defines a timing parameter for the
AGP bus. Leave this item at the default value.
Assign IRQ for
USB
If this item is enabled, an IRQ will be assigned
to the onboard USB ports.
Assign IRQ for
VGA
If this item is enabled, an IRQ will be assigned
to the PCI VGA graphics system.
Load Best Performance Defaults
If you select this item and press
Enter
a dialog box appears. If you
press
Y
, and then
Enter
, the setup utility is loaded with a set of
best performance default values. The setup default values are quite
demanding and your system might not function properly if you are
using slower memory chips or other kinds of low-performance
components.
Load Optimal Defaults
If you select this item and press
Enter
a dialog box appears. If you
press
Y
, and then
Enter
, the setup utility is loaded with a set of
optimal default values. The optimal default values should allow
your system to function with most kinds of hardware and memory
chips.