7
Product Maintenance
Cleaning
To clean the meter, use a soft cloth moistened with water. To avoid damage to the
plastic components do not use benzene, alcohol, acetone, ether, paint thinner,
lacquer thinner, ketone or other solvents to clean the meter.
Troubleshooting
If the meter appears to operate improperly, check the following items first.
1.
Review the operating instructions to ensure the meter is being used properly.
2.
Inspect and test the continuity of the test leads.
3.
Make sure the battery is in good condition. The low battery symbol
B
appears
when the battery falls below the level where accuracy is guaranteed. Replace a
low-battery immediately.
4.
Check the condition of the fuses if the current ranges operate incorrectly.
XW
WARNING
To avoid electrical shock remove the test leads from both the
meter and the test circuit before accessing the battery or the
fuses.
Battery and Fuse Replacement
See Figure
-11-
To access the battery and the mA fuse remove the two screws holding the
Battery/Fuse Cover in place, and lift the cover from the meter.
To replace the mA fuse, pry it from its clips using a small screwdriver. A spare mA
fuse is located between the battery and the mA fuse.
mA Fuse:
Fast Blow .315 A/1000 V minimum interrupt rating 30 kA
(6.3 x 32 mm) (Amprobe
®
FP300)
To replace the 10 A fuse: 1) Remove the battery. 2) Remove the four rear-case
screws. 3) Separate the case. 4) Remove the 10 A fuse cover. 5) Remove and
replace the 10 A fuse. 6) Re-install the fuse cover. 7) Reassemble the meter.
10A Fuse:
Fast Blow 10 A/1000 V, minimum interrupt rating 30 kA
(10 x 38 mm) (Amprobe
®
FP100).
Repair
All test tools returned for warranty or non-warranty repair or for calibration should
be accompanied by the following: your name, company’s name, address, telephone
number, and proof of purchase. Additionally, please include a brief description of
the problem or the service requested and include the test leads with the meter.
Non-warranty repair or replacement charges should be remitted in the form of a
check, a money order, credit card with expiration date, or a purchase order made
payable to Amprobe
®
Test Tools.
www.
.com
1.800.561.8187
Summary of Contents for 33XR-A
