4
1.
Power Switch
.
2. Power Indicator Light
. Turns red when
power is turned on.
3. Mic Volume Control
. This knob controls
output loudness to all 3 mic inputs and Siren.
4. Dynamic Mic Jack.
Dynamic is one kind of
mic. AmpliVox’s wired, hand-held mic is this
type.
5. Auxiliary Volume Control.
This volume
knob controls the auxiliary volume separately
from the mic volume.
6. Tone Control
. This knob controls the tone of
the auxiliary input. Turn counter-clockwise for
more bass or clockwise for more treble. (The
mic jacks don’t need a tone control because
they have been pre-optimized for the human
voice.
7. Left & Right Speaker Jacks.
Plug
speaker leads from speakers into the
two jacks.
8. Line Out Jack
. Can be used with a
tape recorder The Line Out Jack out-
puts all the sound from the 3 mic inputs
and the auxiliary input.
9. Auxiliary Line In Jack.
To play mu-
sic, just plug in your CD player, MP3
player or Amplivox Bluetooth Receiver.
10. Wireless Mic Jack.
Optional se-
cond wireless receiver goes here. Then
plug AmpliVox’s lapel or headset mic
into the transmitter; that’s the one with
the belt clip. Now you are hands-free
anywhere within a 300- foot radius of
the receiver.
11. Condenser Mic Jack
—with phan-
tom power. If you don’t know what
phantom power is, then you don’t need
to know, but a condenser mic won’t
work without it. If you have AmpliVox’s
lapel or headset mic, plug it in here.
12. Aux Out.
For optional 12-15 volt
accessory.
13. DC In Jack.
Used for the 12V
Battery Cable, 12V Power Plug or
the optional International AC Adapt-
er/Recharger, plug it in here. Plug
the other end into a wall / floor outlet.
14. Wireless ON/OFF Switch
Switches power on to the built-in 16
channel wireless receiver.
15. Wireless 16 Channel Selector
Channel that you select here must
match with the channel that is select-
ed on the bodypack microphone
transmitter.
16.
Wireless 16 Channel UHF
Bodypack Microphone Transmit-
ter.
Connect Lapel or Headset mi-
crophone here.
15. Wireless 16 Channel Selector
—
rotate knob to select wireless channel on the
built-in receiver. RF LED will light up when
receiving signal from transmitter.
16. Wireless 16 Channel
UHF Bodypack Microphone
Transmitter
Wireless Channel Selector
CONTROL PANEL FEATURES
1. Power Switch
2. Power Indicator Light
3. Mic Volume-
controls all 3 mic inputs
4. Dynamic Mic Jack
—
1/4 ″ for wired, hand-held mic.
5. Auxiliary Volume
—
controls the auxiliary input separately from the mic volume
6. Tone Control
—
for auxiliary input; counterclockwise for more bass; clockwise
for more treble
7. Left & Right
Speaker Jacks
—
1/4
″
8. Line Out
—
3.5mm
record your presentation with a tape record-
er or a computer sound card
9. Auxiliary Line In
—
3.5mm
add
music with a tape player, CD or MP3
player
10. Wireless Mic Jack -3.5mm
for optional
wireless receiver
11. Condenser Mic Jack
-
3.5mm
for
lapel or headset mic
12. Aux Out -
for optional 12-15 volt accessory.
13. DC In Jack
—
plug
in optional Universal AC
Adapter/ Recharger for power.
14. Wireless ON/OFF Switch
Channel selected must match
15. Wireless Channel Selector
(see Below)