6
1. Power Switch
2. Power Indicator Light
- Turns red
when power is turned on.
3. Mic Volume Control
- This knob
controls output loudness to all 3
microphone inputs and Siren.
4. Dynamic Mic Jack
-
Dynamic is one
kind of microphone. AmpliVox’s wired,
hand-held microphone is this type.
5. Auxiliary Volume Control
-
This
volume knob controls the auxiliary
volume separately from the
microphone volume.
6. Tone Control
- This knob controls the
tone of the auxiliary input. Turn coun
ter-clockwise for more bass or clock
wise for more treble. (The mic jacks
don’t need a tone control because
they have been pre-optimized for the
human voice.
7. Left & Right Speaker Jacks
-
Two
separately amplified speaker jacks allow
you to use one or two speakers for
additional sound power or true stereo
output.
8. Line Out Jack
- Can be used with tape
recorder The Line Out Jack outputs all
the sound from the 3 microphone inputs
and the auxiliary input.
9. Auxiliary Line In Jack
-
To play
music, just plug in your CD player, MP3
player or Amplivox’s Bluetooth Receiver.
10. Wireless Mic Jack
-
You can add an
Optional
wireless receiver (S1690R) at
a future date.
11. Bluetooth Receiver
- Switchable ON /
OFF
12. Condenser Mic Jack
- With phantom
power. If you don’t know what phantom
power is, then you don’t need to know,
but a condenser microphone won’t work
without it. If you have AmpliVox’s lapel
or headset microphone, you can plug it
in here.
13. Aux Out
-
For optional 12-15 volt
accessory.
14. DC In Jack
-
Used for the 12V Battery
Cable, 12V Power Plug or the optional
International AC Adapter/Recharger,
plug it in here. Plug the other end into a
wall / floor outlet.
15. Wireless ON/OFF Switch
-
Switches power on to the built-in
16 channel wireless receiver.
16. Wireless 16 Channel Selector
-
Channel that you select here must
match with the channel that is selected
on the handheld / bodypack microphone
transmitter.
17. Wireless 16 Channel UHF Bodypack
(S1690T) Channel Selector
-
Rotate knob to select wireless channel.
WARNING! When using two wireless
microphones with the SW224A, you must
select a different channel number for
each microphone. If you select the same
channel number, your wireless lapel /
headset or handheld microphone will not
operate.
17. Wireless Bodypack Channel
Selector
-
rotate knob to select wire-
less channel. RF LED will light up on
receiver when receiving signal from
transmitter. Channel numbers must
match
AMPLIFIER FEATURES
1. Power Switch
2. Power Indicator Light
3. Mic Volume
-
con-
trols all 3 mic inputs
4. Dynamic Mic Jack
-
1/4″
for wired, hand-held mic.
5. Auxiliary Volume
-
controls the auxiliary input
separately from the mic volume
6. Tone Control
-
for auxiliary input; counter
clockwise for more bass;
clockwise for more treble
7. Left & Right
Speaker Jacks
-
1/4 ″
8. Line Out
-
3.5mm
record your presentation with a
recorder or on a computer
9. Auxiliary Line In
-
3.5mm
add music with a tape player,
CD or MP3 player
10. Wireless Mic Jack
-
3.5mm
for optional
wireless receiver
12. Condenser Mic Jack
-
3.5mm
for
lapel or headset mic
13. Aux Out
-
for optional 12-15
volt accessory.
14. DC In Jack
-
plug
in optional
Universal AC Adapter/ battery
charger for power
15. Wireless ON/OFF Switch
Model SW222A / SW223A /
SW224A
16. Wireless Channel Selector
Model SW222A / SW223A / SW224A
11. Bluetooth Receiver
-
stream
music from any Bluetooth wire-
less device.
1-
800-572-2194 • DISPLAYS2GO.COM